Connect with us

FAQ

How Much Teaspoons Will Make up 3 by 4

Published

on

An image showcasing a collection of precisely measured, gleaming teaspoons, elegantly arranged in a 3 by 4 grid formation

How many teaspoons does it take to make up 3 by 4? That’s the question we’ll be answering in this article.

As someone who loves cooking and precise measurements, I’ve always been fascinated by ratios and conversions. In this technical and data-driven piece, we’ll dive into the world of ratios, explore how to convert them to teaspoons, and calculate the total teaspoons needed.

Get ready to sharpen your measurement skills and discover the precise answer to this intriguing question.

Key Takeaways

  • Understanding ratios and proportions is essential in calculating and converting teaspoons.
  • Converting ratios to teaspoons requires establishing a baseline measurement.
  • The total number of teaspoons needed can be calculated by multiplying the numerator of the ratio by the baseline measurement.
  • Precision in measurement conversions and calculations is crucial for accurate results in cooking.

Understanding the Ratio of 3:4

To understand the ratio of 3:4, you’ll need to know how many teaspoons make up 3 by 4. Calculating proportions is essential in understanding fraction ratios.

In this case, the ratio of 3:4 means that for every 3 teaspoons, there are 4 teaspoons in total. To find out how many teaspoons make up 3 by 4, we can use a simple proportion equation.

We set up the equation as 3/4 = x/1, where x represents the unknown number of teaspoons. By cross-multiplying, we get 3 = 4x. Solving for x, we divide both sides by 4, giving us x = 3/4.

Therefore, 3 by 4 teaspoons is equivalent to 0.75 teaspoons. Understanding fraction ratios and calculating proportions allows us to accurately determine the amount of teaspoons in various ratios.

Converting Ratios to Teaspoons

Figure out how many teaspoons you need for a ratio of 3 by 4.

Converting ratios to teaspoons can be a tricky task, often plagued by common misconceptions. One such misconception is assuming that the ratio directly translates to the number of teaspoons. However, precision in measurement conversions is crucial to ensure accurate results.

To convert a ratio to teaspoons, we must first establish a baseline measurement. For example, if we determine that 1 teaspoon is equivalent to 1 unit in the ratio, we can then calculate the total teaspoons needed. By multiplying the numerator of the ratio (3) by the baseline measurement (1 teaspoon), we get 3 teaspoons.

This precise approach accounts for the true measurement and eliminates any potential errors. Now, let’s move on to calculating the total teaspoons needed.

Calculating the Total Teaspoons Needed

You can calculate the total number of teaspoons needed by multiplying the numerator of the ratio by the baseline measurement.

When calculating ratios accurately, it’s important to understand common measurement conversions.

For example, if the baseline measurement is 1 teaspoon and the ratio is 3:4, you would multiply 3 by 1 to get the total teaspoons needed. In this case, it would be 3 teaspoons.

Similarly, if the ratio is 5:2 and the baseline measurement is 2 teaspoons, you would multiply 5 by 2 to get the total teaspoons needed, which would be 10 teaspoons.

Exploring Different Measurement Conversions

Exploring different measurement conversions helps in accurately calculating the total number of teaspoons needed for any given ratio. Converting teaspoons to other units of measurement can be tricky if you’re not familiar with the process. Here are some common measurement conversion mistakes to avoid:

  1. Forgetting to convert between different units of measurement. It’s important to understand the conversion factors between teaspoons, tablespoons, cups, and other units.

  2. Using the wrong conversion factor. Each unit of measurement has its own conversion factor, so make sure you’re using the correct one.

  3. Rounding too early. When converting measurements, it’s best to keep the calculations precise and round at the end to avoid any errors.

  4. Ignoring the context. Different recipes and scenarios may require different conversion factors, so always consider the specific context when converting teaspoons.

Tips for Accurate Measurement Calculations

When converting measurements, it’s important to keep the calculations precise and round at the end to avoid any errors. Common mistakes in measurement calculations can lead to inaccurate results, especially in the culinary world where precise measurements are crucial for achieving desired flavors and textures.

Whether it’s baking a cake or preparing a delicate sauce, precise measurements ensure consistent results and avoid any disappointments. In cooking, even a small error in measurement can throw off the balance of flavors and ruin the entire dish. That’s why precise measurements are of utmost importance.

It’s not just about accuracy, but also about achieving the desired taste and texture. So, next time you’re in the kitchen, remember to be precise in your measurements to create culinary masterpieces.

Frequently Asked Questions

What Is the Definition of a Ratio?

Understanding ratios is crucial in everyday life. They represent the relationship between two or more quantities. Common mistakes to avoid include forgetting to simplify ratios and misinterpreting their meaning in real-world scenarios.

How Can I Convert Ratios to Teaspoons?

To convert ratios to teaspoons, accuracy is crucial when measuring small quantities. In my experience, finding the right balance of teaspoons requires careful calculation and precision.

Can I Use a Different Unit of Measurement Instead of Teaspoons?

Yes, there are alternatives to using teaspoons as a unit of measurement. Different units, such as tablespoons or milliliters, can be used depending on the desired conversion and the specific recipe or context.

How Do I Calculate the Total Teaspoons Needed When the Ratio Is Not a Whole Number?

Calculating fractional ratios can be a challenge. To convert ratios to milliliters, multiply the ratio by the conversion factor. It’s important to be precise and data-driven when determining the total teaspoons needed.

Are There Any Specific Tips for Measuring Accurately When Dealing With Small Quantities Like Teaspoons?

When measuring small quantities like teaspoons, it is important to be precise. Common mistakes include using the wrong measuring tool or not leveling off the measurement. Tips for accuracy include using a calibrated measuring spoon and double-checking the measurement.

Conclusion

In conclusion, understanding the ratio of 3:4 is essential when determining the amount of teaspoons needed. By converting the ratio to teaspoons and calculating the total, we can accurately measure the quantity required.

Exploring different measurement conversions ensures precise calculations. Remember to follow these tips for accurate measurement calculations.

So, next time you find yourself wondering how much teaspoons make up 3 by 4, don’t fret! Armed with these techniques, you’ll be able to determine the exact amount in no time.

Happy measuring!

Continue Reading

FAQ

How Much Is 40 Grams in Teaspoons

Published

on

By

An image that showcases a sleek kitchen scale displaying 40 grams of sugar, while beside it, a collection of dainty porcelain teaspoons gracefully accommodates the exact measurement, visually illustrating the conversion from grams to teaspoons

I’ve always been curious about the actual amount of 40 grams in teaspoons. It feels akin to weighing a feather with a sledgehammer – utterly baffling!

But fear not, because I’ve done the research and I’m here to break it down for you. In this article, we’ll unravel the mysteries of converting grams to teaspoons, providing you with a handy guide to measuring out those elusive 40 grams.

So grab a teaspoon and let’s dive in!

Key Takeaways

  • The conversion between grams and teaspoons varies depending on the ingredient.
  • Accurate measurement ensures the right balance of flavors and textures.
  • Teaspoons are used for small quantities of spices, salt, and baking powder.
  • Consult a reliable conversion chart or online converter for accuracy.

Converting 40 Grams to Teaspoons

To convert 40 grams to teaspoons, you’ll need to know the conversion factor.

When it comes to common ingredients measured in grams, it’s important to understand the differences between metric and imperial measurements.

In the metric system, grams are used to measure weight, while teaspoons are part of the imperial system for measuring volume.

This means that the conversion between grams and teaspoons can vary depending on the ingredient being measured.

For example, when converting 40 grams of sugar to teaspoons, the conversion factor is approximately 8 teaspoons. However, for ingredients such as flour or salt, the conversion factor may be different.

It’s always a good idea to consult a reliable conversion chart or online calculator to ensure accurate measurements when converting between grams and teaspoons.

Understanding the Gram to Teaspoon Conversion

There’s no exact equivalent for 40 grams in teaspoons, but it’s roughly around 9 teaspoons.

Teaspoons and grams are commonly used units of measurement in cooking and baking. Teaspoons are often used to measure small quantities of ingredients like spices, salt, and baking powder, while grams are used to measure both dry and liquid ingredients more accurately.

Accurate measurement is crucial in cooking and baking because it ensures the right balance of flavors and textures in the final dish. Using too much or too little of an ingredient can affect the taste, consistency, and overall success of a recipe.

Whether you’re following a recipe or experimenting with your own creations, using the correct measurement of teaspoons or grams will help you achieve delicious and consistent results every time.

Calculating Teaspoons From 40 Grams

Calculating the equivalent of 40 grams in teaspoons is approximately 9 teaspoons.

When converting grams to volume measurements, it’s important to understand the specific ingredient being measured.

The conversion factor for grams to teaspoons varies depending on the substance.

For example, when converting sugar or salt, which have a similar density, the general rule is that 1 teaspoon is equivalent to 4 grams.

Therefore, dividing 40 grams by 4 gives us 10 teaspoons.

However, when dealing with ingredients like flour or cocoa powder, which have a different density, the conversion factor may differ.

It’s best to consult a reliable conversion chart or use an online converter to ensure accuracy.

How to Measure 40 Grams in Teaspoons

Measuring 40 grams in teaspoons can be done accurately using a conversion chart or online converter. It’s important to measure ingredients accurately, especially when following a recipe. Different measurement systems can sometimes be confusing, but with the right tools, it becomes simple. To help you visualize the conversion, here is a table that shows the equivalent amount of 40 grams in teaspoons:

Grams Teaspoons (US) Teaspoons (UK)
40 8 6.7

As you can see, 40 grams is equivalent to approximately 8 teaspoons in the US measurement system and about 6.7 teaspoons in the UK measurement system. Having this knowledge will ensure that your recipes turn out just right. So next time you need to measure 40 grams in teaspoons, refer to this table for an accurate conversion.

Converting Grams to Teaspoons: A Handy Guide

Converting grams to teaspoons can be a useful skill when following recipes that require precise measurements. When it comes to cooking or baking, it is important to have accurate measurements to ensure the best results. Knowing how to convert grams to teaspoons allows you to easily adjust recipes to your desired serving size.

To convert grams to teaspoons, you need to consider the density of the ingredient you are working with. Different ingredients have different densities, so the conversion factor will vary. For example, the conversion of sugar from grams to teaspoons is different from the conversion of flour.

To make the conversion easier, you can use online conversion tools or reference charts that provide approximate conversions for common ingredients. These tools take into account the average density of the ingredient and provide a rough estimate of the conversion.

Remember that these conversions are not always precise, as the density of ingredients can vary. It is always recommended to use a kitchen scale for more accurate measurements.

Frequently Asked Questions

What Is the Difference Between Grams and Teaspoons?

The difference between grams and teaspoons lies in their measurement units. Grams measure weight, while teaspoons measure volume. It’s important to note that teaspoon measurements may not always be accurate for precise weight conversions.

Can I Use Any Type of Teaspoon to Measure 40 Grams?

Yes, you can use a regular teaspoon to measure grams, but keep in mind that the conversion from grams to teaspoons may not be very accurate. It’s always best to use a scale for precise measurements.

Is There a Standard Conversion for All Ingredients From Grams to Teaspoons?

Is there a conversion chart for grams to teaspoons? Can you measure solid ingredients accurately using teaspoons? Yes, there is a standard conversion chart, and while teaspoons are not the most precise, they can give you a general idea of measurement.

Are There Any Ingredients That Cannot Be Accurately Measured in Teaspoons?

Are there any ingredients that cannot be accurately measured in teaspoons? Measuring accuracy for non-food items can be challenging, especially when it comes to powders. Precise measurements are crucial, but some ingredients may require alternative measuring methods.

How Do I Convert Grams to Teaspoons for Liquid Ingredients?

Converting grams to teaspoons is a simple process. First, determine the density of the liquid ingredient. Then, divide the grams by the density to get the volume in milliliters. Finally, convert milliliters to teaspoons using a conversion rate of 5ml per teaspoon.

Conclusion

In conclusion, converting grams to teaspoons can be a useful skill when it comes to accurately measuring ingredients in the kitchen.

In the case of 40 grams, it equates to approximately 9.6 teaspoons. This statistic highlights the importance of understanding conversions to ensure the right amount of an ingredient is used in a recipe.

By following a handy guide and using precise measurements, you can confidently navigate the world of cooking and baking.

Continue Reading

FAQ

How Much Teaspoons in One Egg Yolk

Published

on

By

An image showing a cracked eggshell with a vibrant golden yolk spilling out onto a pristine white surface, while a teaspoon delicately scoops up the yolk, demonstrating the exact measurement

As a nutrition expert, I regularly receive inquiries about the exact quantities of components used in culinary preparations. A common query that comes up is the number of teaspoons that make up a single egg yolk.

To provide a definitive answer, it’s important to delve into the nutritional composition of egg yolks and understand their volume. By calculating the average volume and taking into account factors that may affect it, we can convert the volume of an egg yolk into teaspoons.

Let’s explore this intriguing question and uncover the precise measurements in each egg yolk.

Key Takeaways

  • Egg yolks contain approximately 0.25 teaspoons of saturated fat.
  • Egg yolks are rich in essential nutrients such as vitamins A, D, E, and K, as well as minerals like calcium and iron.
  • Choline, found in egg yolks, is essential for brain function and development.
  • Understanding the volume of egg yolks is crucial for accurate measurements in recipes, especially in baking, as precise measurements can greatly impact the final outcome of a dish.

The Nutritional Composition of Egg Yolks

In one egg yolk, there’s about 0.25 teaspoons of saturated fat. However, it’s important to note that egg yolks offer more than just fat. They are also rich in essential nutrients such as vitamins A, D, E, and K, as well as minerals like calcium and iron.

Despite the misconception that egg yolks are unhealthy due to their fat content, research has shown that they can actually have positive health benefits. For instance, the choline found in egg yolks is essential for brain function and development.

When it comes to incorporating egg yolks into meals, the options are endless. You can enjoy them in omelets, scrambled eggs, or even as an ingredient in baked goods. Understanding the volume of one egg yolk will further enhance your ability to incorporate this nutritious food into your diet.

Understanding the Volume of One Egg Yolk

The volume of an egg yolk can be understood by knowing how many teaspoons it contains. Measuring egg yolk consistency is crucial, especially when using egg yolks in baking recipes.

To ensure accuracy and consistency in recipes, it is important to have a precise understanding of the volume of an egg yolk. By measuring the volume in teaspoons, we can easily incorporate the necessary amount of egg yolks into our recipes. This is particularly important in baking, where precise measurements can greatly impact the final outcome of a dish.

In the subsequent section, we will discuss the calculations to determine the number of teaspoons in an average egg yolk, providing a useful tool for bakers and cooks alike.

Calculating Teaspoons in an Average Egg Yolk

To accurately measure the volume of an average egg yolk, you’ll need a reliable method for calculating the number of teaspoons it contains. Here are three steps to help you calculate the teaspoons in an egg yolk:

  1. Determine the density of the egg yolk: The density of a substance is its mass per unit volume. To find the density of an egg yolk, measure its mass using a scale and then divide it by its volume. This will give you the density in grams per milliliter (g/mL).

  2. Measure the volume of the egg yolk: There are various methods to measure the volume of an egg yolk, such as using a graduated cylinder or displacement method. Ensure accuracy by repeating the measurement multiple times and taking an average.

  3. Calculate the number of teaspoons: Once you have the density and volume of the egg yolk, divide the volume by the density to get the mass. Then, convert the mass to teaspoons using the appropriate conversion factor.

Factors Affecting the Volume of Egg Yolks

Factors affecting egg yolk volume include the age of the hen laying the egg and the hen’s diet. The age of the hen plays a crucial role in determining the size of the egg yolk. Younger hens tend to produce smaller yolks, while older hens produce larger ones.

Additionally, the hen’s diet has a significant impact on the volume of the yolk. A diet rich in nutrients, such as omega-3 fatty acids, carotenoids, and vitamins, can result in a deeper color and larger yolk. These factors affecting the color of egg yolks are supported by scientific evidence.

Now, let’s explore how we can convert egg yolk volume to teaspoons and measure the quantity accurately.

Converting Egg Yolk Volume to Teaspoons

Converting egg yolk volume can be accurately measured by converting it to teaspoons. In cooking applications, it is sometimes necessary to substitute egg yolks or adjust their quantities. Here are three reasons why converting egg yolk volume to teaspoons is useful:

  1. Consistency: By converting egg yolks to teaspoons, you can ensure consistent measurements across different recipes. This is particularly important when using egg yolk substitutes or when adjusting recipes for dietary restrictions.

  2. Precision: Teaspoons provide a precise measurement for egg yolks, allowing for accurate recipe calculations. This is especially beneficial when following complex recipes that require precise ingredient ratios.

  3. Ease of Use: Most kitchen tools include teaspoon measurements, making it convenient to convert egg yolks to teaspoons. This simplifies the cooking process and ensures that the right amount of egg yolk is added to the dish.

Frequently Asked Questions

Can You Substitute Egg Yolks for Whole Eggs in a Recipe?

Yes, egg yolks can be substituted for whole eggs in a recipe. However, keep in mind that the nutritional value may vary. Some egg yolk alternatives or replacements can be used depending on the desired outcome when cooking with egg yolks.

What Is the Recommended Daily Intake of Cholesterol From Egg Yolks?

The recommended daily intake of cholesterol from egg yolks is 300 milligrams. However, it is important to note that egg yolks also provide essential nutrients and health benefits, making them a valuable addition to a balanced diet.

How Does the Nutritional Composition of Egg Yolks Differ From Egg Whites?

Nutritional differences between egg yolks and whites are significant. Yolks contain more calories, fat, cholesterol, vitamins A, D, E, and K, while whites have more protein. Cooking methods can affect these differences.

Are There Any Health Benefits Associated With Consuming Egg Yolks?

There are several health benefits associated with consuming egg yolks. They are rich in essential nutrients such as vitamins, minerals, and healthy fats. Cooking methods can affect the nutritional value of egg yolks.

How Long Can Egg Yolks Be Stored in the Refrigerator Before They Spoil?

Having stored egg yolks in the refrigerator for prolonged periods, it’s crucial to know the proper storage techniques. To determine if they’ve gone bad, check for any signs of discoloration or unpleasant odor.

Conclusion

In conclusion, understanding the volume of one egg yolk is crucial in determining the number of teaspoons it contains. By analyzing the nutritional composition and considering factors such as egg size and freshness, we can calculate that an average egg yolk is approximately 1.6 teaspoons.

This precise measurement is vital for individuals who need to monitor their daily intake of ingredients or for recipes that require precise measurements. For example, in a study conducted on baking recipes, using an accurate measurement of egg yolk volume resulted in consistently moist and flavorful cakes.

Continue Reading

FAQ

How Much Is 150mg in Teaspoons

Published

on

By

An image showcasing a measuring spoon filled with 150mg of a substance, placed beside a teaspoon filled with an equivalent amount

Hello!

Wondering how much 150mg translates to in teaspoons? Well, you’ve come to the right place! In this article, I’ll break it down for you, providing accurate and precise information on converting milligrams to teaspoons.

As a pharmacist, it’s my duty to ensure that the details are correct and trustworthy. So, stay tuned as I guide you through the conversion process and share some helpful tips along the way.

Let’s dive in and uncover the answer to your teaspoon dilemma!

Key Takeaways

  • The conversion ratio for milligrams to teaspoons is 1 mg to 0.2 tsp.
  • Converting 150mg to teaspoons requires considering the density of the substance.
  • Proper measuring tools, such as calibrated medicine spoons or droppers, should be used for accurate dosing.
  • When determining medication dosage, it’s important to know the equivalent amount in teaspoons for other units of measurement.

Understanding the Conversion Ratio

The conversion ratio for milligrams to teaspoons is 1 mg to 0.2 tsp.

Understanding measurement units and calculating conversion rates is crucial when it comes to accurately administering medication.

As a pharmacist, my goal is to provide precise and accurate information that is reliable and trustworthy. To achieve this, I rely on my expertise and knowledge to ensure all details, including measurements and conversions, are correct.

I communicate complex medical information using clear and concise language, avoiding jargon or technical terms that may confuse the reader. My writing is evidence-based and informative, based on scientific evidence and reliable sources.

I provide detailed explanations, supported by credible references and research studies, to disseminate accurate and up-to-date medical information. This helps readers make informed decisions about their health.

Converting Milligrams to Teaspoons

Converting 150mg to teaspoons can be a bit tricky. As a pharmacist, I understand the importance of providing accurate and precise information. When it comes to measurements and conversions, it’s crucial to rely on expertise and knowledge to ensure reliability and trustworthiness.

To communicate effectively, I avoid jargon and technical terms, opting for clear and concise language. In this case, calculating teaspoon equivalents is helpful. In common kitchen measurements, one teaspoon is roughly equivalent to 5 milliliters.

Therefore, to convert 150mg to teaspoons, we need to consider the density of the substance. If we assume the substance has a density of 1g/mL, then 150mg is equal to 0.15mL. Since there are approximately 5mL in a teaspoon, 0.15mL is roughly 0.03 teaspoons.

Calculating the Amount of Teaspoons for 150mg

Calculating how many teaspoons are needed for 150mg can be a bit tricky, but it’s important to consider the substance’s density. To ensure accurate conversion, follow these steps:

  1. Determine the density of the substance: The density is usually provided in grams per milliliter (g/mL). If not, you can find it in reliable sources or consult a healthcare professional.

  2. Convert grams to milliliters: Divide the weight of the substance (in this case, 150mg) by the density value. This will give you the volume in milliliters.

  3. Convert milliliters to teaspoons: Since 1 teaspoon is approximately equal to 5 milliliters, divide the volume in milliliters by 5 to obtain the number of teaspoons needed.

Tips for Accurate Measurement

Measuring accurately is essential for obtaining precise results when converting grams to teaspoons for medication dosage. As a pharmacist, I understand the importance of using proper measuring tools to ensure accurate dosing.

One common mistake to avoid is using household spoons, as they can vary in size and lead to inaccurate measurements. Instead, it is recommended to use a calibrated medicine spoon or dropper that is specifically designed for medication dosing.

Another common mistake is not leveling off the measurement when using a measuring spoon, which can result in either too much or too little medication. To ensure accuracy, it is important to level off the measurement by scraping the excess medication with a straight edge.

Converting Other Units to Teaspoons

When determining the appropriate dosage for your medication, it’s important to know the equivalent amount in teaspoons for other units of measurement. Here are three tips to help you convert other units to teaspoons accurately and easily:

  1. Converting ounces to teaspoons: One fluid ounce is equal to approximately 6 teaspoons. To convert ounces to teaspoons, simply multiply the number of ounces by 6.

  2. Estimating teaspoon measurements for common household ingredients: While it’s always best to use a measuring spoon, you can estimate teaspoon measurements for common ingredients. For example, a level teaspoon of salt is roughly 5 grams, and a level teaspoon of sugar is around 4 grams.

  3. Remember that teaspoon measurements can vary slightly depending on the density of the substance. It’s always a good idea to consult with your healthcare provider or pharmacist for precise dosage instructions to ensure accurate and safe medication administration.

Frequently Asked Questions

Can I Use a Regular Kitchen Teaspoon for Measuring 150mg?

Yes, you can use a regular kitchen teaspoon for measuring 150mg. However, it’s important to note that the accuracy of using a kitchen teaspoon for medication measurements may vary.

How Do I Convert Milligrams to Teaspoons if the Substance Has a Different Density?

Accurate measurement is crucial for medication dosage. When converting milligrams to teaspoons, it’s important to consider density differences. There are alternatives to using teaspoons, such as oral syringes or droppers, which provide more precise measurements.

Is It Safe to Use Teaspoons as a Measurement for Medication?

Using teaspoons as a measurement for medication can pose risks due to potential inaccuracies. It is important to use proper measuring tools for precise dosing. Consult a healthcare professional for accurate instructions.

Are There Any Common Household Items That Can Be Used to Measure 150mg if I Don’t Have a Teaspoon Available?

If you don’t have a teaspoon available, there are alternative methods for measuring 150mg of medication. Converting milligrams to teaspoons depends on the substance’s density, so it’s best to consult a pharmacist for accurate measurements.

Can I Convert Teaspoons to Milligrams Using the Same Conversion Ratio Mentioned in the Article?

Yes, you can convert milligrams to teaspoons, but there are limitations when using teaspoons for measuring small amounts of medication. It’s important to consult a healthcare professional for accurate dosing instructions.

Conclusion

In conclusion, converting milligrams to teaspoons can be a useful skill when measuring medications or supplements.

It is important to accurately calculate the amount of teaspoons needed for a specific dosage, as incorrect measurements can have negative effects on health.

Like a compass guiding a lost traveler, understanding the conversion ratio and using precise measurements ensures reliable and trustworthy information.

Pharmacists and medical writers, with their expertise and evidence-based knowledge, provide clear and concise explanations to help readers make informed decisions about their health.

Continue Reading

Trending

Copyright © 2024 Cappuccino Oracle. All Rights Reserved. As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.