Connect with us

FAQ

How Much Is 15 Ml in Teaspoons

Published

on

An image featuring two identical teaspoons, one filled with 15 ml of liquid and the other showing the equivalent measurement in teaspoons, visually illustrating the conversion from milliliters to teaspoons

Imagine you’re in the kitchen, carefully following a recipe that calls for 15 ml of a liquid ingredient. But wait, you don’t have a measuring spoon for milliliters! How much is 15 ml in teaspoons?

Don’t worry, we’ve got you covered. In this article, we’ll break down the conversion process and give you the precise answer.

Accurate measurements are crucial in the culinary world, so let’s delve into the world of kitchen conversions and learn how to measure liquids like a pro.

Key Takeaways

  • Milliliters and teaspoons are units of volume in different measurement systems.
  • To convert milliliters to teaspoons, divide the number of milliliters by 4.93.
  • In the United States and some other countries, teaspoons are commonly used for cooking and medicine.
  • 15 milliliters is equivalent to 3 teaspoons.

Understanding the Conversion

Understanding the conversion from milliliters to teaspoons can be helpful when measuring small amounts. When comparing metric and imperial measurements, it is important to note that milliliters are a unit of volume in the metric system, while teaspoons are a unit of volume in the imperial system.

To convert milliliters to teaspoons, you need to know that 1 teaspoon is equal to approximately 4.93 milliliters. Therefore, to convert milliliters to teaspoons, you can divide the number of milliliters by 4.93.

For example, if you have 15 milliliters, you can divide 15 by 4.93 to get approximately 3.04 teaspoons. This conversion can be useful when following recipes or when dealing with medication doses that are given in milliliters but need to be measured using teaspoons.

Converting 15 Ml to Teaspoons

Converting 15 ml to teaspoons can be done easily using an online conversion tool. It is important to understand that different measurement systems are used around the world.

In the metric system, milliliters (ml) are commonly used to measure volume. However, in the United States and a few other countries, teaspoons are commonly used for cooking and medicine.

To convert ml to teaspoons, you can use the conversion factor of 1 teaspoon is equal to 5 ml. Therefore, to convert 15 ml to teaspoons, you divide 15 by 5, which equals 3 teaspoons.

It’s crucial to accurately measure ingredients or medications, as slight variations can have a significant impact on the outcome. Now that you know how to convert ml to teaspoons, let’s explore the importance of accurate measurements in the next section.

The Importance of Accurate Measurements

When it comes to measuring ingredients or medications, you need to ensure accuracy for the best results. Precision is key in determining the correct amount of a substance, as even a slight deviation can have a significant impact on the outcome. Inaccurate measurements can lead to ineffective medications, spoiled recipes, or even potential health risks. It is crucial to understand the importance of precision and the consequences of inaccurate measurements.

Measurement Accuracy Impact
Ingredients Precise Optimal outcome
Medications Accurate Proper dosage
Recipes Exact Delicious taste
Health Correct Safe consumption

Common Kitchen Conversions

If you’re in a hurry and need to quickly convert a recipe, there are some common kitchen conversions that can save you time and effort.

When it comes to cooking measurements, the metric system is widely used and provides precise and accurate results.

Converting milliliters to teaspoons is a common task in the kitchen. To convert 15 milliliters to teaspoons, you can use the conversion factor of 5 milliliters per teaspoon.

By multiplying 15 milliliters by the conversion factor, you will find that it is equivalent to 3 teaspoons.

This conversion can come in handy when following a recipe or adjusting ingredient quantities.

Understanding these common kitchen conversions can make your cooking experience more efficient and enjoyable.

Tips for Measuring Liquids

Measuring liquids accurately can be made easier with these helpful tips.

To ensure measuring accuracy, it is important to use the appropriate tools. When it comes to measuring spoons, there are different types available for liquid measurements. The most common types include teaspoon and tablespoon measures. These spoons come in various sizes, allowing for precise measurements.

To measure liquids accurately, fill the spoon until it is level with the rim. Avoid overfilling or underfilling, as this can affect the accuracy of your measurements. Additionally, make sure to read the measurement markings on the spoon carefully.

Frequently Asked Questions

Can I Use a Regular Spoon to Measure 15 Ml?

Yes, you can use a regular spoon to measure 15 ml. However, it’s important to note that a regular spoon may not provide accurate measurements. Using a measuring spoon or a kitchen scale would be a more precise alternative.

How Do I Convert Tablespoons to Teaspoons?

To convert tablespoons to teaspoons, you need to know that 1 tablespoon is equal to 3 teaspoons. This conversion is consistent when converting metric measurements and can be used as a reliable guideline.

What Are Some Common Kitchen Conversions for Baking Ingredients?

To convert grams to cups, multiply the weight in grams by the conversion factor for the specific ingredient. Common kitchen conversions are essential for precise baking.

How Do I Measure Liquids Accurately Without a Measuring Cup?

To measure liquids accurately without a measuring cup, there are alternative methods you can use. These methods include using a kitchen scale, using a graduated cylinder, or converting the measurement using a conversion chart.

Are There Any Tips for Converting Between Metric and Imperial Measurements?

Converting metric to imperial measurements can be tricky, but fear not! By using standardized units in cooking, you’ll avoid confusion and ensure accuracy. Now, let’s dive into the world of teaspoons and milliliters.

Conclusion

In conclusion, it’s crucial to have a clear understanding of conversions when measuring liquids accurately. Converting 15 ml to teaspoons may seem simple, but it ensures the correct amount for your recipe.

Remember, precise measurements are essential for achieving the desired taste and consistency in your dishes. So, next time you’re in the kitchen, ask yourself, ‘Can I afford to compromise on the accuracy of my measurements?’

The answer lies in the success of your culinary endeavors.

Continue Reading

FAQ

How Much Is 5/8 Oz in Teaspoons

Published

on

By

An image showcasing a measuring spoon filled with 5/8 oz of a substance, surrounded by a collection of accurately labeled teaspoons displaying the equivalent volume to help readers understand the conversion

I’ve often pondered what 5/8 oz converts to in teaspoons. This type of measurement can be somewhat perplexing, yet understanding the conversion rate can significantly ease the process.

In this article, I’ll guide you through the step-by-step process of converting 5/8 oz to teaspoons, ensuring accuracy along the way. We’ll also explore common mistakes to avoid and practical uses for converting ounces to teaspoons.

So, let’s dive in and unravel this teaspoon mystery together.

Key Takeaways

  • One ounce is equal to 6 teaspoons.
  • Accuracy in measurements is crucial for consistent outcomes and well-balanced final products.
  • When converting 5/8 oz to teaspoons, follow a step-by-step guide to ensure accuracy.
  • Avoid common mistakes such as misinterpreting the measurement or using the wrong conversion factor.

Understanding the Conversion Ratio

To understand the conversion ratio, it’s important to know how many teaspoons are in 1 ounce.

Many people have common misconceptions about teaspoon measurements, often assuming that one teaspoon is equal to one ounce. However, this is not accurate. In fact, there are 6 teaspoons in 1 fluid ounce.

Understanding this conversion ratio is crucial when converting different units of measurement accurately. Whether you are following a recipe or calculating medication dosages, knowing the correct conversion ratio ensures precise and reliable results.

It’s important to note that teaspoon measurements can vary depending on the substance being measured, such as dry or liquid ingredients. Therefore, it’s always recommended to refer to a reliable conversion chart for accurate measurements.

The Importance of Accuracy in Measurements

Accuracy in measurements is crucial for precise results. When it comes to measuring ingredients for baking, accuracy is of utmost importance. Here are four reasons why accuracy is essential in measurements:

  1. Consistency: Accurate measurements ensure that the same amount of ingredients is used each time, resulting in consistent and predictable outcomes.

  2. Texture and Taste: Precision in measurements determines the texture and taste of the final baked goods. Even a slight difference in the amount of ingredients can alter the outcome significantly.

  3. Conversions: Converting milliliters to teaspoons requires accurate measurements to ensure accuracy in the final result. Precision is key when converting between different units of measurement.

  4. Recipe Ratios: Many baking recipes rely on specific ratios of ingredients. Accurate measurements ensure that these ratios are maintained, resulting in a well-balanced final product.

Ensuring accuracy in measurements is vital for successful baking. Now, let’s dive into the step-by-step guide on how to convert 5/8 oz to teaspoons.

Converting 5/8 Oz to Teaspoons: Step-by-Step Guide

Take a closer look at how you can convert 5/8 oz into teaspoons with this step-by-step guide.

To convert 5/8 oz to tablespoons, remember that there are 2 tablespoons in 1 oz. So, divide 5 by 8 to get the fraction of an ounce, which is 0.625 oz. Multiply this by 2 to get the equivalent in tablespoons. Therefore, 5/8 oz is equal to 1.25 tablespoons.

Now, let’s convert 5/8 oz to milliliters. Since 1 oz is approximately equal to 29.57 milliliters, multiply 0.625 oz by 29.57 to get the equivalent in milliliters. Hence, 5/8 oz is approximately equal to 18.48 milliliters.

It’s important to note that these are approximate conversions due to rounding. Now, let’s move on to the next section to learn about common mistakes to avoid when converting 5/8 oz to teaspoons.

Converting 5/8 Oz to Teaspoons: Common Mistakes to Avoid

When converting 5/8 oz to teaspoons, be careful to avoid these common mistakes:

  1. Misinterpreting the measurement: One of the most common misconceptions is assuming that 5/8 oz is equal to 5 or 8 teaspoons. However, this is not accurate.

  2. Using the wrong conversion factor: Another common error is using the wrong conversion factor. The correct conversion factor for converting oz to teaspoons is 1 oz = 6 teaspoons.

  3. Failing to simplify the fraction: Some people forget to simplify the fraction before converting. In this case, 5/8 oz can be simplified to 10/16 oz, which further simplifies to 5/8 oz.

  4. Not rounding the final answer: Lastly, it’s important to remember to round the final answer to the appropriate decimal place. Teaspoons are typically measured to the nearest tenth, so be sure to round accordingly.

Practical Uses for Converting Ounces to Teaspoons

To make your cooking measurements more precise, it’s helpful to know practical uses for converting ounces to teaspoons. Using teaspoons as a unit of measurement in cooking offers several benefits.

First, teaspoons are a smaller unit, allowing for more accurate measurements when dealing with smaller quantities of ingredients. This is particularly important in baking recipes, where precision is key for achieving the desired texture and taste.

Converting ounces to teaspoons in baking recipes requires some tips and tricks. One common method is to use a conversion chart or calculator specifically designed for this purpose. Another approach is to understand the general conversion rate of 1 ounce to approximately 6 teaspoons. However, it’s important to note that different ingredients may have varying densities, which can affect the conversion.

Therefore, it’s always a good idea to consult a reliable source or recipe to ensure accurate measurements for your specific ingredients.

Frequently Asked Questions

Can I Use a Regular Kitchen Spoon to Measure 5/8 Oz of a Liquid Ingredient?

I wouldn’t recommend using a regular kitchen spoon to measure 5/8 oz of liquid. Using a kitchen scale is more accurate. Common misconceptions about measuring liquid ingredients can lead to inconsistent results in recipes.

How Do I Convert Ounces to Teaspoons for Dry Ingredients?

To convert ounces to teaspoons for dry ingredient conversion, I first need to know the density of the ingredient. Then, I can use a conversion factor to determine the teaspoons needed.

Is It Necessary to Convert Ounces to Teaspoons for Every Recipe?

Accurate measurements are crucial in baking. To effectively measure liquid ingredients, use a liquid measuring cup placed on a flat surface. Fill it to the appropriate line and read the measurement at eye level.

Can I Use a Conversion Chart to Convert 5/8 Oz to Teaspoons Instead of Doing the Calculations?

Using a conversion chart for recipe measurements has its benefits. It saves time and ensures accuracy. To get accurate conversions in the kitchen, remember to level off your ingredients and use the appropriate measuring tools.

Are There Any Other Common Measurements Used in Cooking That I Should Be Familiar With?

Different types of measuring cups used in cooking include dry measuring cups, liquid measuring cups, and metric measuring cups. Precise measurements are important in baking to ensure consistent results and the correct balance of ingredients.

Conclusion

In conclusion, converting measurements accurately is crucial in various cooking and baking scenarios. By following the step-by-step guide provided, one can easily convert 5/8 oz to teaspoons.

It is important to avoid common mistakes, such as rounding off numbers, to ensure precision. Remember the adage, ‘Measure twice, cut once,’ emphasizing the significance of accurate measurements in achieving desired results.

Understanding the conversion ratio between ounces and teaspoons enables us to confidently utilize this knowledge in practical ways, enhancing our culinary skills.

Continue Reading

FAQ

How Much Is a Dash in Teaspoons

Published

on

By

An image featuring a pristine white teaspoon, delicately filled with a perfectly measured "dash" of a vibrant-colored substance

I’ve often pondered the exact amount a dash represents in teaspoon measurements. It appears to be one of those quantifications that come across as unclear and not very precise.

Well, in this article, we’re going to dive into the world of cooking measurements and uncover the secrets of the elusive dash. From understanding teaspoon measurements to converting a dash to teaspoons, we’ll cover it all.

So, get ready to become a master of accurate measuring in the kitchen!

Key Takeaways

  • A dash is typically equivalent to about 1/8 of a teaspoon.
  • There are different types of dashes, such as pinch dash, smidgen dash, and drop dash.
  • The measurement of a dash can vary depending on the recipe.
  • Accurate measuring of a dash is important for achieving the desired taste in dishes.

The Measurement of a Dash

A dash is typically equivalent to about 1/8 of a teaspoon.

In culinary measurements, there are actually different types of dashes that can be used. The most common types are a pinch dash, a smidgen dash, and a drop dash. A pinch dash is the smallest amount, followed by a smidgen dash which is slightly larger, and a drop dash which is the largest of the three.

These terms may seem arbitrary, but they actually have historical origins. The term ‘dash’ in cooking measurements originated from the practice of adding a small amount of liquid or seasoning to a dish by quickly pouring it in, or ‘dashing’ it. This measurement became known as a dash, and it has been used ever since.

Understanding teaspoon measurements is important when it comes to accurately following recipes and achieving the desired taste in your dishes.

Understanding Teaspoon Measurements

You can easily understand teaspoon measurements by knowing the conversion rates for different ingredients. When it comes to measuring spices, it’s important to use the right amount to achieve the perfect flavor in your dishes.

Here are some key points to consider:

  • Different types of teaspoons: There are two main types of teaspoons commonly used in cooking – the standard teaspoon and the measuring teaspoon. The standard teaspoon holds approximately 5 milliliters (ml) of liquid, while the measuring teaspoon is designed to hold exactly 5 ml.

  • Conversion rates: It’s crucial to know the conversion rates for spices when using teaspoons. For example, 1 teaspoon of ground cinnamon is equal to approximately 2.6 grams, while 1 teaspoon of salt is equal to approximately 5.9 grams.

Converting a Dash to Teaspoons

To convert a dash to teaspoons, simply use the conversion rate for small measurements like this. A dash is typically considered to be around 1/8 of a teaspoon, or approximately 0.6 milliliters. However, it’s important to note that the exact measurement of a dash can vary depending on the recipe and personal preference.

Some recipes may specify a smaller or larger amount for a dash, so it’s always best to refer to the specific recipe you are using. In different recipes, a dash can be the equivalent of a pinch, a few drops, or a tiny amount of an ingredient.

Now that you know how to convert a dash to teaspoons, let’s explore the practical uses for a dash in cooking.

Practical Uses for a Dash in Cooking

One practical use for a dash in cooking is adding a small amount of flavor to a dish. It may seem like a tiny measurement, but a dash can make a big difference in the taste of a meal.

Seasoning is crucial in cooking because it enhances the natural flavors of the ingredients and creates a well-balanced dish. Different types of dashes are used in culinary arts to achieve specific flavors.

For example:

  • A dash of salt can bring out the savory notes in a soup or sauce, adding depth to the dish.
  • A dash of cinnamon can add warmth and sweetness to desserts, creating a comforting and indulgent experience.

By using dashes strategically, chefs can elevate the taste of their creations and create memorable dining experiences for their guests.

Tips for Accurately Measuring a Dash

When measuring a dash, be sure to use a measuring spoon with clear markings to accurately add the desired amount of flavor to your dish.

Here are some tips for measuring small amounts and avoiding common mistakes.

First, always level off the dash by scraping any excess with a straight edge, like a knife. This ensures consistency in your measurements.

Second, when measuring a dash, hold the spoon over the dish you are adding the flavor to, rather than measuring it separately and then adding it in. This helps avoid spillage and ensures that all of the flavor goes into the dish.

Lastly, if a recipe calls for multiple dashes, measure each one separately to ensure accuracy.

Frequently Asked Questions

Can a Dash Be Used as a Substitute for a Teaspoon in Recipes?

Using a dash as a substitute for a teaspoon in recipes has its pros and cons. The pros include a small amount of seasoning, while the cons involve lack of precision. To measure a dash accurately, use a dash spoon or take a guess.

Are There Any Other Common Measurements That a Dash Is Equivalent To?

Sure, a pinch can be used as a substitute for a dash in recipes. Some common recipes that call for a dash of an ingredient are cocktails, soups, and dressings.

How Can I Ensure That I Am Using the Right Amount of a Dash in My Cooking?

To accurately measure a dash in my cooking, I make sure to rely on my instincts and experience. I also consider that the size of a dash can vary depending on the recipe or ingredient.

Can the Size of a Dash Vary Depending on the Recipe or Ingredient?

Different sizes of dashes can impact the overall flavor of a recipe. The taste of a dish can be affected by how much of an ingredient is added, and a dash can vary in size depending on the recipe or ingredient.

Are There Any Alternative Measurements That Can Be Used Instead of a Dash?

There are alternative measurements for a dash, such as a pinch or a drop. To convert a dash to other measurements, you can use a conversion chart or experiment with different amounts.

Conclusion

In conclusion, mastering the art of measuring a dash can elevate your cooking skills to new heights.

Imagine the moment when you effortlessly sprinkle a dash of seasoning into a bubbling pot, the aroma wafting through the air and tantalizing your taste buds.

With a precise understanding of teaspoon measurements, you can confidently convert a dash to teaspoons, ensuring the perfect balance of flavors in your culinary creations.

Remember to follow the tips shared here for accurate measurements, and let your cooking skills shine with every dash you sprinkle.

Continue Reading

FAQ

How Much Is 30mg in Teaspoons

Published

on

By

An image showcasing a small spoon filled with white granules representing 30mg

Were you aware that a measurement as small as 30mg holds considerable importance in terms of teaspoons?

In this article, I will guide you through the process of converting 30mg to teaspoons. Understanding this conversion is crucial for accurate dosing and avoiding potential health risks.

Whether you’re dealing with medication or cooking ingredients, knowing how much 30mg is in teaspoons can make a big difference.

So, let’s dive in and explore this important measurement.

Key Takeaways

  • The conversion ratio between milligrams and teaspoons can vary depending on the substance being measured.
  • Different substances have different conversion ratios.
  • Accurate dosage measurements are crucial for medication effectiveness and safety.
  • Even a small mistake in measuring 30mg in teaspoons can have significant consequences.

Understanding the Conversion: Milligrams to Teaspoons

To understand the conversion from milligrams to teaspoons, it’s important to know the ratio. When converting milligrams to other units of measurement, accuracy is crucial.

The ratio between milligrams and teaspoons can vary depending on the substance being measured. For example, the conversion ratio for water is approximately 5 milligrams to 0.001 teaspoons. However, for substances with different densities or consistencies, the conversion ratio may be different.

To ensure accurate measurements, it is essential to consult reliable sources or use conversion charts specifically designed for the substance in question. Precision is key when dealing with medications or substances that require precise dosing. Incorrect measurements can have serious consequences, so it’s always best to double-check and be certain of the conversion ratio before administering any substance.

The Basics: Milligrams and Teaspoons Explained

There’s a simple way to understand the conversion between milligrams and teaspoons. It’s important to have a clear understanding of these different units of measurement, especially when it comes to accurate dosage measurements in medicine.

Milligrams (mg) are a unit of weight, while teaspoons are a unit of volume. In medicine, dosage instructions are often given in milligrams, as it is a more precise measurement. However, when administering medication, it is often more practical to use teaspoons as a measuring tool. This is because most people have teaspoons readily available in their homes.

It is crucial to ensure accurate dosage measurements in medicine to guarantee the effectiveness and safety of the medication. So, next time you need to convert milligrams to teaspoons, remember the importance of precise measurements in the field of medicine.

Converting 30mg to Teaspoons: A Step-by-Step Guide

When converting 30 milligrams to teaspoons, you can follow these step-by-step instructions. First, determine the density factor for the substance you are working with. This factor represents how many milligrams are in one teaspoon of the substance. Next, divide 30 milligrams by the density factor to find the equivalent amount in teaspoons. It’s important to note that the density factor can vary depending on the substance, so be sure to use the correct value for accurate results.

Common Mistakes: Pitfalls to Avoid When Converting mg to tsp

Common Mistake Explanation Solution
Using the wrong density factor Each substance has its own density factor Check reliable sources or consult a professional
Rounding off too early Rounding can lead to inaccurate results Keep calculations precise and round off at the end
Forgetting to convert units Make sure all values are in the same unit Convert units before performing calculations

Knowing the conversion from milligrams to teaspoons can be useful in various practical applications. For example, when measuring medication dosage or following a recipe that requires precise measurements. Accuracy matters when it comes to measuring 30mg in teaspoons, as even a small error can affect the desired outcome or even pose a safety risk. So, let’s delve into why accuracy is so important in the next section.

Accuracy Matters: Why Measuring 30mg in Teaspoons Is Important

Make sure you measure accurately when converting 30mg to teaspoons, as even a small mistake can have significant consequences. When it comes to medication or any substance that requires precise dosage, measuring accuracy is crucial. Here are four reasons why precise measurements matter:

  • Safety: Accurate measurements ensure you are taking the correct amount of medication, avoiding potential overdosing or underdosing.
  • Effectiveness: Precise measurements guarantee that you are getting the intended therapeutic effect of the medication.
  • Consistency: Accurate measurements help maintain consistency in dosing, ensuring that you receive the same amount of medication each time.
  • Avoiding waste: Precise measurements minimize the chances of wasting medication by taking more or less than needed.

Now that we understand the importance of measuring accuracy, let’s explore common conversions: other milligram measurements in teaspoons.

Common Conversions: Other Milligram Measurements in Teaspoons

Accurate measurements are essential for converting other milligram measurements to teaspoons. When it comes to converting 50mg to teaspoons, a practical guide can be helpful.

To begin, it’s important to note that 1 teaspoon is equivalent to approximately 5,000 milligrams. Therefore, to convert 50mg to teaspoons, we divide 50 by 5,000, which gives us 0.01. So, 50mg is equal to 0.01 teaspoons.

It is also useful to compare milligram measurements to tablespoon equivalents. One tablespoon is roughly equal to 15 milliliters, which is equivalent to approximately 15,000 milligrams. This means that if you have a milligram measurement, you can divide it by 15,000 to find its approximate tablespoon equivalent.

Frequently Asked Questions

Can I Use a Regular Kitchen Teaspoon to Measure 30mg Accurately?

Yes, you can use a regular kitchen teaspoon to measure 30mg accurately. However, it is important to note that using a tablespoon instead of a teaspoon may result in inaccurate measurements. Inaccurately measuring medications in teaspoons can have potential consequences on dosage and effectiveness.

How Do I Convert Milligrams to Teaspoons if I Don’t Have a Measuring Spoon?

Converting milligrams to teaspoons without a measuring spoon can be tricky. But don’t worry, there are alternatives! For example, you can use a medicine dropper or a syringe to accurately measure your medication.

Are There Any Health Risks Associated With Measuring Medications in Teaspoons Instead of Using a More Precise Method?

Using teaspoons to measure medication can be inaccurate and pose health risks. It’s important to use a more precise method, like a measuring spoon or syringe, to ensure the correct dosage.

Is It Possible to Convert Milligrams to Teaspoons for Liquids With Different Densities?

It is possible to convert milligrams to teaspoons for liquids with different densities. However, it is important to consider liquid density for accuracy of measurements.

Can I Convert Milligrams to Teaspoons for All Types of Substances, or Are There Certain Substances Where This Conversion Method Is Not Applicable?

I can convert milligrams to teaspoons for most substances, but the conversion accuracy may vary depending on the density. However, it’s important to note that there are alternative measurement methods that may provide more precise results.

Conclusion

In conclusion, converting milligrams to teaspoons is an essential skill when it comes to precise measurements. Knowing how much 30mg is in teaspoons can make a significant difference in accurately administering medication or following a recipe.

So, next time you come across a measurement in milligrams, remember that a teaspoon can hold a specific amount of substance. Don’t let the small size fool you, as even a tiny teaspoon can make a big impact when it comes to dosing or cooking.

Continue Reading

Trending

Copyright © 2024 Cappuccino Oracle. All Rights Reserved. As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.