Connect with us

FAQ

1 and a Half Teaspoons of Motrin Equals How Much

Published

on

An image depicting a measuring spoon filled with one and a half teaspoons of Motrin, perfectly level, against a clean white background

As someone who frequently relies on pain relievers, I often find myself wondering just how much medication I’m actually taking. In this article, I will delve into the world of Motrin, specifically focusing on the dosage of 1 and a half teaspoons.

By understanding the recommended dosage, converting teaspoons to milligrams, and exploring the effects, we can gain a clearer picture of just how potent this medication truly is.

So, let’s dive in and uncover the facts about 1 and a half teaspoons of Motrin.

Key Takeaways

  • Recommended dosage of Motrin is typically one to two tablets every four to six hours, depending on the severity of pain or fever.
  • Converting 1.5 teaspoons of Motrin to milligrams, it is equivalent to 75mg (3.75mL x 20mg/mL).
  • Taking more than the recommended dose of Motrin can lead to potential side effects such as stomach bleeding, kidney problems, and liver damage.
  • When comparing the potency of Motrin with other pain relievers, it is important to consider factors such as effectiveness, side effects, and recommended dosage. Motrin and Advil have similar effectiveness in relieving pain, but Motrin has a higher potential for side effects like stomach upset and ulcers, while Tylenol has a lower effectiveness but carries a risk of liver damage. It is always advisable to consult with a healthcare professional before choosing a pain reliever.

Understanding the Recommended Dosage of Motrin

The recommended dosage of Motrin is typically one to two tablets every four to six hours, depending on the severity of the pain or fever. It is important to follow the instructions provided by your healthcare professional or the label on the medication.

Taking more than the recommended dose can lead to potential side effects, including stomach bleeding, kidney problems, and liver damage. Overdosing on Motrin can be dangerous and should be avoided. If you suspect an overdose, seek immediate medical attention.

It is also worth noting that when converting teaspoons to milliliters for Motrin, it is essential to use an accurate measuring device, such as a medicine syringe or a measuring spoon, as using regular kitchen utensils may result in inaccurate dosing.

Now, let’s move on to converting teaspoons to milligrams for Motrin.

Converting Teaspoons to Milligrams for Motrin

Converting teaspoons of Motrin to milligrams is as simple as using the right measurement.

To calculate the dosage of Motrin in milligrams, you need to know the concentration of the medication and the conversion factor. The concentration of Motrin is usually 100mg per 5mL.

So, if you have a half teaspoon of Motrin, which is approximately 2.5mL, you can calculate the dosage by multiplying the volume in milliliters by the concentration in milligrams per milliliter.

In this case, a half teaspoon of Motrin would be equivalent to 50mg (2.5mL x 20mg/mL).

It’s important to note that dosage calculations should always be done accurately to ensure the correct administration of medication.

Always consult with a healthcare professional for precise dosing instructions.

Exploring the Effects of 1 and a Half Teaspoons of Motrin

To explore the effects of 1 and a half teaspoons of Motrin, you’ll need to pay attention to any changes in your body and consult a healthcare professional if necessary.

Motrin, also known as ibuprofen, is a common over-the-counter medication used to relieve pain and reduce inflammation.

Here are some potential side effects to be aware of when taking 1.5 teaspoons of Motrin:

  • Upset stomach or indigestion
  • Headache or dizziness
  • Allergic reactions such as rash or hives

It’s important to note that these side effects may vary from person to person and can also depend on factors such as age, overall health, and dosage.

While 1.5 teaspoons of Motrin can be effective in relieving pain and reducing inflammation, it’s always recommended to follow the instructions and consult with a healthcare professional if you have any concerns or experience severe side effects.

Comparing the Potency of Motrin With Other Pain Relievers

When comparing the potency of Motrin with other pain relievers, you should consider factors such as effectiveness, side effects, and recommended dosage. To make this comparison easier, I have created a table that outlines the key information for Motrin and two other commonly used pain relievers: Tylenol and Advil.

Pain Reliever Effectiveness Potential Side Effects
Motrin High Stomach upset, ulcers
Tylenol Moderate Liver damage
Advil High Stomach bleeding

Based on this table, Motrin and Advil have similar levels of effectiveness in relieving pain. However, Motrin has a higher potential for side effects such as stomach upset and ulcers. On the other hand, Tylenol has a lower effectiveness but carries a risk of liver damage. It’s important to consider these factors when choosing a pain reliever, and it’s always best to consult with a healthcare professional before starting any medication.

Safe Usage Tips and Precautions for Taking Motrin

It’s important to follow these safe usage tips and precautions when taking Motrin. Here are some key points to keep in mind:

  • Recommended Dosage:

  • Adults and children 12 years and older: Take 1 to 2 tablets every 4 to 6 hours, as needed. Do not exceed 6 tablets in 24 hours.

  • Children under 12 years: Consult a doctor for appropriate dosage.

  • Potential Side Effects:

  • Common side effects may include stomach upset, heartburn, and dizziness. If these persist or worsen, consult a healthcare professional.

  • Serious side effects are rare but may include allergic reactions, liver damage, and kidney problems. Seek immediate medical attention if you experience any unusual symptoms.

  • Precautions:

  • Avoid taking Motrin if you have a history of stomach ulcers, bleeding disorders, or kidney disease.

  • Do not take this medication with other NSAIDs or if you are allergic to ibuprofen.

Frequently Asked Questions

Can Motrin Be Taken With Other Medications?

Taking Motrin with other medications can have interactions. It’s important to consider potential risks and benefits before combining medications. Always consult a healthcare professional for guidance on drug interactions.

How Long Does It Take for Motrin to Start Working?

Motrin typically starts relieving pain within 30 minutes to an hour. It may take longer to reduce inflammation. However, for specific dosages like 1 and a half teaspoons, consult a healthcare professional.

Can I Consume Alcohol While Taking Motrin?

I can drink alcohol while taking Motrin but it’s best to limit my intake. Alcohol can increase the risk of stomach bleeding and may interfere with the effectiveness of the medication. Following the recommended dosage guidelines is important.

What Is the Maximum Daily Dosage of Motrin?

The maximum dose of Motrin is 3200 mg per day. Exceeding this recommended dosage can increase the risk of side effects such as stomach bleeding, kidney problems, and cardiovascular events.

Are There Any Potential Side Effects of Taking Motrin Long-Term?

Long-term use of Motrin may have potential risks and side effects. It’s important to be aware of the possible consequences of prolonged usage, such as gastrointestinal issues and increased risk of cardiovascular events.

Conclusion

In conclusion, it is important to understand the recommended dosage of Motrin to ensure safe and effective use.

Converting teaspoons to milligrams can help determine the appropriate amount to take.

Taking 1 and a half teaspoons of Motrin may have varying effects on individuals, so it is crucial to consult a healthcare professional.

Comparing the potency of Motrin with other pain relievers can aid in making informed choices.

Lastly, following safe usage tips and precautions will further enhance the positive outcomes of using Motrin.

It is essential to prioritize our well-being and make informed decisions when it comes to medication.

Continue Reading

FAQ

How Much Is 10 Drops in Teaspoons

Published

on

By

An image showcasing a clear measuring spoon, filled with precisely measured 10 drops of liquid

Have you ever wondered how much liquid 10 drops actually equate to in teaspoons? Well, I’m here to shed some light on this common question. Understanding the conversion ratio and factors that affect drop size are key in determining the answer.

By converting drops to milliliters and then to teaspoons, we can accurately calculate the amount of 10 drops in teaspoons. So, let’s dive in and uncover the truth behind this intriguing measurement.

Key Takeaways

  • Conversion ratio is crucial for determining the amount of 10 drops in teaspoons.
  • Drop size can vary depending on factors such as viscosity and temperature.
  • Factors like viscosity and dropper size should be considered when calculating the conversion.
  • Accurate measurements are essential in medical and culinary applications.

Understanding the Conversion Ratio

You should understand the conversion ratio for determining how much 10 drops is in teaspoons.

Common misconceptions about drop size can lead to inaccurate measurements in both medical and culinary applications. Drops are often assumed to be the same size across different liquids, but this is not always the case. The actual size of a drop can vary depending on factors such as viscosity and temperature.

Therefore, it’s crucial to use an accurate conversion ratio when converting drops to teaspoons. Accurate measurements are essential in medical applications, where precise dosages can greatly impact patient health. In culinary applications, accurate measurements ensure consistent flavors and successful recipes.

Understanding the conversion ratio is key to ensuring accurate and reliable measurements in both these fields.

Factors Affecting Drop Size

Calculating the conversion accurately is important. It’s important to consider the factors that affect the size of drops. Drop size variability can vary depending on a few key factors.

One important factor is the viscosity of the substance being dropped. Viscosity refers to how thick or thin a liquid is. Thicker liquids, such as syrup or honey, tend to form larger drops compared to thinner liquids like water. This is because thicker liquids have a higher resistance to flow, causing them to form larger droplets.

Additionally, the size of the dropper or pipette used can also affect drop size. Droppers with smaller openings tend to produce smaller drops, while those with larger openings produce larger drops.

Therefore, when calculating the conversion of drops to teaspoons, it’s crucial to take into account these factors that can influence the size of the drops.

Converting Drops to Milliliters

When converting drops to milliliters, it’s important to consider the viscosity of the liquid being measured. Some liquids are thicker and have a higher viscosity, while others are thinner and have a lower viscosity.

To help you understand the volume of 10 drops, here are some examples:

  • For water: 10 drops is approximately 0.5 milliliters.
  • For olive oil: 10 drops is approximately 0.6 milliliters.
  • For honey: 10 drops is approximately 1.2 milliliters.

These measurements may vary slightly depending on factors such as the size of the dropper or the technique used to count the drops. It’s always a good idea to use a calibrated dropper for accurate measurements.

Now, let’s move on to the next section where we will discuss converting milliliters to teaspoons.

Converting Milliliters to Teaspoons

To convert milliliters to teaspoons, it’s helpful to know that 5 milliliters is equivalent to approximately one teaspoon.

In common kitchen measurements, teaspoons are commonly used to measure small amounts of liquid ingredients.

If you need to convert teaspoons to other units of volume, such as milliliters, you can use the conversion factor of 5 milliliters per teaspoon.

For example, if you have 3 teaspoons of a particular ingredient, you can multiply that by 5 to get the equivalent amount in milliliters, which would be 15 milliliters.

This conversion is useful when working with recipes that use different units of volume or when you need to measure ingredients precisely.

Now, let’s move on to calculating the amount of 10 drops in teaspoons.

Calculating the Amount of 10 Drops in Teaspoons

If you want to know how many teaspoons are in 10 drops, you can use the conversion factor of 1 drop per 0.05 teaspoons. By multiplying the number of drops by the conversion factor, you can calculate the equivalent amount in teaspoons. In this case, 10 drops multiplied by 0.05 teaspoons per drop gives you 0.5 teaspoons.

To paint a picture for the audience, here are three scenarios where calculating drop size is important in measuring liquid medication:

  • A mother needs to administer the correct dose of cough syrup to her child. She carefully counts the drops to ensure the accurate amount of medication is given.

  • A nurse in a hospital is responsible for administering a prescribed liquid medication to a patient. By calculating the drop size, the nurse can accurately measure the required dosage.

  • A pharmacist must compound a medication that requires precise measurements. By knowing the drop size, the pharmacist can accurately prepare the medication for the patient.

Calculating drop size is crucial in accurately measuring liquid medication, ensuring proper dosages are administered to patients.

Frequently Asked Questions

Can the Size of a Drop Vary Depending on the Substance Being Dropped?

Yes, the size of a drop can vary depending on the substance. It’s important to note that accurately measuring drops can be challenging due to variations in drop size.

How Can I Accurately Measure 10 Drops Without a Dropper?

To accurately measure 10 drops without a dropper, there are alternative methods available. It’s important to consider measuring accuracy when using these methods.

Is It Possible for a Drop to Have a Volume Greater Than 1 Milliliter?

It is not possible for a drop to have a volume greater than 1 milliliter. When measuring drops, it is important to consider the dropper size and the liquid being used.

Are There Any Safety Precautions to Consider When Using Drops for Medication or Essential Oils?

When it comes to using drops for medication or essential oils, it’s important to take safety precautions. There are potential risks involved, so it’s crucial to follow proper dosing instructions and consult with a healthcare professional.

Can Drop Size Be Affected by Factors Such as Temperature or Altitude?

The size of drops can be affected by temperature and altitude. These factors can cause drops to be larger or smaller than usual. It’s important to consider these effects when measuring medication or essential oils.

Conclusion

So, there you have it – the answer to the question ‘how much is 10 drops in teaspoons.’

By understanding the conversion ratio and factors affecting drop size, we can confidently convert drops to milliliters and then to teaspoons. In this case, 10 drops would roughly equal 0.5 milliliters, which is equivalent to approximately 0.1 teaspoons.

Remember, as the old saying goes, ‘Every drop counts,’ and now you have the knowledge to accurately measure those drops in teaspoons.

Continue Reading

FAQ

How Much Tea Is 2.5 G in Teaspoons

Published

on

By

An image showcasing a precise measurement of 2

As a tea enthusiast, I’ve often found myself pondering the perfect measurement for brewing a delightful cup. So, let’s dive into the world of tea measurements together, shall we?

In this article, we’ll explore the magical conversion from grams to teaspoons for tea. Today, our focus is on the precise quantity of 2.5 grams of tea and how it translates into teaspoons.

Get ready to uncover the secrets of tea scoops, tips for accurate measurements, and the art of converting grams to teaspoons.

Let’s embark on this flavorful journey!

Key Takeaways

  • The conversion ratio for tea can vary depending on the type of tea and its density.
  • Accuracy in measurement is crucial for brewing the perfect cup of tea.
  • Tea leaves vary in size and density, so relying on teaspoons alone may not provide precise results.
  • Using a kitchen scale ensures the correct amount of tea is used for a consistent and flavorful brew.

The Conversion Ratio of Grams to Teaspoons for Tea

To convert 2.5 grams of tea to teaspoons, you’ll need to know the conversion ratio. The conversion ratio for tea can vary depending on the type of tea and its density.

It is important to have an accurate conversion ratio to ensure proper measurement of tea. One commonly used conversion ratio is 1 gram of tea to 0.2 teaspoons. This means that 2.5 grams of tea would be equivalent to 0.5 teaspoons.

However, it’s important to note that this ratio may not be accurate for all types of tea. To ensure the most accurate measurement, it is recommended to use a kitchen scale to weigh the tea and then consult a reliable source or manufacturer for the specific conversion ratio of that particular tea.

Accuracy in tea measurement is crucial for achieving the desired taste and strength in your cup of tea.

Understanding the Measurement: 2.5 Grams of Tea

You can measure 2.5 grams of tea by using a kitchen scale. When it comes to brewing the perfect cup of tea, accuracy in measurement is crucial. Tea leaves vary in size and density, so relying on teaspoons alone may not always provide the most precise results. Using a kitchen scale ensures that you are using the correct amount of tea, leading to a more consistent and flavorful brew.

Measurement accuracy is especially important when experimenting with different tea brewing techniques, such as gong fu style or cold brew. By accurately measuring 2.5 grams of tea, you can explore the nuances of different tea varieties and discover the optimal brewing method for each.

Tea Scoop Sizes: How Much Tea Fits in a Teaspoon

Using a kitchen scale is the most accurate way to measure the amount of tea that fits in a teaspoon. However, for those who don’t have a scale or prefer a simpler method, understanding tea scoop sizes can be helpful.

A standard teaspoon typically holds around 2.5 grams of tea, but this can vary depending on the size and shape of the tea leaves. Tea scoop sizes are often measured in teaspoons or tablespoons, with larger scoops holding more tea.

It’s important to note that the accuracy of tea measurement can affect the taste and strength of your brew. Using a consistent scoop size and measuring method will ensure that you achieve the desired flavor profile every time.

Measuring Tea: Tips and Tricks for Accurate Teaspoon Measurements

Understanding the importance of accuracy in measuring tea can help ensure a perfect cup every time.

As a tea enthusiast, I have learned that using the right tea measuring tools is crucial for achieving the desired flavor and strength.

One common mistake in tea measurements is using a regular teaspoon, which can vary in size and lead to inconsistent results. Instead, I recommend investing in a proper tea measuring spoon or scale.

A tea measuring spoon is specifically designed to measure the perfect amount of loose leaf tea, ensuring a consistent brew every time.

Another mistake is not leveling off the tea when measuring, which can result in using too much or too little.

Converting Grams to Teaspoons: Calculating the Perfect Amount of Tea

To ensure the perfect amount of tea, it’s helpful to know how to convert grams into teaspoons. Converting grams to teaspoons is essential for accurately measuring tea, especially when using kitchen scales for precise measurements.

While grams are the standard unit of measurement for tea, many tea drinkers are more familiar with teaspoons, the imperial measurement for tea. Converting grams to teaspoons allows for better understanding and convenience in preparing the desired amount of tea.

To convert grams to teaspoons, it is important to know the density of the tea being used. Different teas have different densities, so the conversion may vary. However, as a general guideline, 2.5 grams of tea is roughly equivalent to half a teaspoon. This conversion can be adjusted depending on personal preferences for strength and flavor.

Frequently Asked Questions

What Are the Health Benefits of Drinking Tea?

Drinking tea has numerous health benefits. It is rich in antioxidants, which help protect the body against free radicals. Additionally, studies suggest that tea can aid in weight loss by boosting metabolism and reducing appetite.

Can I Use a Regular Kitchen Spoon to Measure My Tea Instead of a Teaspoon?

Can I use a regular kitchen spoon to measure my tea? While it may seem convenient, using a kitchen spoon may compromise the accuracy and precision of your tea measurements.

How Long Should I Steep Tea for the Best Flavor?

Steeping time variations and brewing techniques greatly impact the flavor of tea. To achieve the best flavor, it’s essential to steep the tea for the right amount of time. Let me explain the details.

What Is the Difference Between Loose Leaf Tea and Tea Bags?

Loose leaf tea and tea bags differ in quality and steeping process. Loose leaf tea offers a richer flavor and aroma due to its whole leaves, while tea bags contain smaller, broken pieces. Steeping times may also vary.

How Many Cups of Tea Can I Make With 2.5 Grams of Tea?

I can make a few cups of tea with 2.5 grams of tea. The exact number depends on the type of tea and personal preference for strength.

Conclusion

In conclusion, understanding the conversion of grams to teaspoons is essential for measuring tea accurately.

With 2.5 grams of tea, it’s important to consider the size of your tea scoop, as different teaspoons may hold varying amounts.

By following tips and tricks for precise teaspoon measurements, you can ensure the perfect amount of tea for your brew.

Just like a conductor expertly orchestrates a symphony, mastering the art of measuring tea will result in a harmonious and enjoyable tea-drinking experience.

So grab your teaspoon and let the magic steep!

Continue Reading

FAQ

How Much in Teaspoons Is 25 Grams

Published

on

By

An image that showcases a small, transparent measuring spoon filled precisely with 25 grams of granulated sugar, while a teaspoon hovers nearby, highlighting the conversion

Have you ever found yourself in the kitchen, trying to convert grams to teaspoons? Well, let me tell you, I’ve been there too. It can be quite a puzzle, but fear not! In this article, I’m going to break it down for you and show you exactly how many teaspoons are in 25 grams.

We’ll explore the conversion ratio, calculate the teaspoons, and share some practical tips to make your measurements a piece of cake. So, let’s dive in and solve this teaspoon-gram mystery together!

Key Takeaways

  • 25 grams can be converted to teaspoons by multiplying it by 5.
  • The conversion ratio for 25 grams to teaspoons is approximately 5 teaspoons.
  • The conversion ratio of 5 teaspoons for every 25 grams is commonly used.
  • The ratio may vary slightly depending on ingredient density.

Converting 25 Grams to Teaspoons

You can convert 25 grams to teaspoons by multiplying it by 5. This conversion is based on the standard teaspoon measurement, which is commonly used in cooking and baking.

When converting units, it is important to consider the specific conversion factor for the desired measurement. In this case, the conversion factor is 5, meaning that for every gram, there are 5 teaspoons.

By multiplying 25 grams by 5, we find that 25 grams is equal to 125 teaspoons. This conversion allows us to easily measure ingredients in teaspoons, which is a common unit of measurement in many recipes.

Next time you come across a measurement in grams, you can quickly convert it to teaspoons using this simple conversion factor.

Understanding the Conversion Ratio

The conversion ratio for 25 grams to teaspoons is approximately 5 teaspoons. This means that if you have 25 grams of a substance, you can expect it to be roughly equivalent to 5 teaspoons in volume. Understanding this measurement conversion is important for accurately calculating teaspoon equivalents for various ingredients.

Here are a few examples to help you visualize the conversion:

  • 25 grams of sugar is roughly equal to 5 teaspoons. Imagine scooping 5 teaspoons of sugar into a bowl.

  • 25 grams of flour is also approximately 5 teaspoons. Picture adding 5 teaspoons of flour to a mixing bowl.

  • 25 grams of salt would be about 5 teaspoons. Visualize sprinkling 5 teaspoons of salt onto your food.

  • 25 grams of butter is roughly equal to 5 teaspoons. Imagine spreading 5 teaspoons of butter on a slice of bread.

Calculating Teaspoons From Grams

Calculating teaspoons from grams can be done by using the conversion ratio of approximately 5 teaspoons for every 25 grams. This conversion ratio is commonly used to convert between these two units of measurement in cooking and baking. It is important to note that this ratio may vary slightly depending on the density of the ingredient being measured.

When converting grams to teaspoons, it is also helpful to consider the size of the teaspoon being used, as different countries may have slightly different teaspoon measurements. To calculate the number of teaspoons from grams, simply divide the weight in grams by 5. For example, if you have 25 grams, you would divide it by 5 to get 5 teaspoons.

This conversion ratio provides a quick and easy way to estimate the amount of an ingredient in teaspoons based on its weight in grams.

Measurement Equivalents: Grams to Teaspoons

Converting grams to teaspoons can be a helpful way to measure ingredients in cooking and baking. It allows for more accuracy in recipe measurements, especially when dealing with small quantities.

Here are some common ingredients that can be measured in both grams and teaspoons:

  • Salt: 1 teaspoon of salt is equivalent to about 5 grams.
  • Sugar: 1 teaspoon of sugar weighs around 4 grams.
  • Flour: 1 teaspoon of flour is approximately 2.5 grams.
  • Baking powder: 1 teaspoon of baking powder weighs about 4 grams.

It’s important to note that the accuracy of measuring grams in teaspoons may vary slightly depending on the ingredient and its density. However, using a kitchen scale to measure grams and then converting to teaspoons can provide a good estimate for most recipes.

Practical Tips for Measuring Grams in Teaspoons

Measuring ingredients in grams and converting to teaspoons can help ensure precise measurements in cooking and baking. When it comes to teaspoon to gram conversion, it’s important to remember that the density of the ingredient plays a significant role.

For example, 1 teaspoon of water weighs approximately 5 grams, while 1 teaspoon of flour weighs about 2.5 grams. To convert grams to teaspoons, you can use a conversion chart or consult a reliable online source.

It’s also helpful to have a set of measuring spoons that include both grams and teaspoons. This way, you can easily measure ingredients using whichever unit you prefer.

Frequently Asked Questions

Can I Use Any Type of Teaspoon to Measure Grams?

Yes, you can use any type of teaspoon to measure grams. However, it’s important to note that teaspoons are not precise for measuring grams. It’s recommended to use metric measurements instead. Common conversions for teaspoons and grams vary, so it’s best to consult a conversion chart.

Is the Conversion Ratio the Same for All Ingredients?

The conversion ratio for grams to teaspoons varies depending on the ingredient. There is no standard conversion chart that applies to all ingredients. It’s important to consult specific conversion charts for accurate measurements.

How Accurate Is the Conversion From Grams to Teaspoons?

When comparing the accuracy of measuring grams to teaspoons in baking recipes, it’s important to consider the potential margin of error for various ingredients. The conversion may not always be precise.

Are There Any Exceptions to the Conversion Ratio?

There can be exceptions in converting grams to teaspoons, which may lead to potential errors in measuring grams with a teaspoon. It’s important to note these exceptions to ensure accurate conversions.

How Do I Measure Grams Using a Regular Kitchen Teaspoon?

To measure grams using a regular kitchen teaspoon, you can’t rely on accuracy. There are alternative methods, like using a scale, that provide more precise measurements.

Conclusion

In conclusion, converting grams to teaspoons can be a useful skill to have in the kitchen. By understanding the conversion ratio and using a simple calculation, you can easily determine how many teaspoons are in a given amount of grams.

Remember to always refer to a reliable measurement equivalent chart for accuracy. And don’t forget, when measuring grams in teaspoons, it’s important to be precise and use the proper measuring tools.

So next time you come across a recipe that calls for grams, you’ll be ready to confidently convert it to teaspoons. Happy cooking!

Continue Reading

Trending

Copyright © 2024 Cappuccino Oracle. All Rights Reserved. As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.